Elite Furnaces - General Temperature Control Options

Temperature Controller & Programmer Options

Elite offer, as standard, a number of microprocessor based instruments from the now well established Eurotherm 2000 Series.

Other makes of instrumentation can be supplied in accordance with your instructions. The following is a guide to the capabilities of the standard range of controllers offered.

Elite Furnaces - General Temperature Control Options

Controllers	Programmers
Eurotherm 2116 - (Overtemperature Controller) When used for Overtemperature Protection the 2116 controller operates with its own independent thermocouple to shut the furnace down if the controller setpoint temperature is exceeded.	Eurotherm 2416 CG A dual display PID programmer comprising one programme with 8 free format segments. Each segment can be used as a ramp, a dwell, a step or end of programme.
Eurotherm 2216 A dual display PID controller showing setpoint and furnace temperature. A ramp to setpoint is also included.	Eurotherm 2408 CP A dual display PID programmer comprising one programme with 16 free format segments, similar to the 2416 CG but housed in a larger case and is able to incorporate more optional features.

Nb. Higher specifications are available on some controller models. Refer to features guide below

Controller / Programmer Features Guide
Controller	2116	2216	2416 C.G.	2408 C.P.	2408 P4	2408 C.M.
Size (mm)	48 x 48	48 x 48	48 x 48	48 x 96	48 x 96	48 x 96
Communications	X	O	O	O	O	O
Dual Display	X	S	S	S	S	S
Alarm Display	I	O	O	O	O	O
Programmer Features
Typical Profiles
No of Programmes	X	X	1	1	4	20
No of Segments (free format)	X	X	8	16	16	16

X - Option not available | O - Optional feature | S - Standard feature

Digital Communications & Data Logging Software

Temperature Recorders

Digital Communications ports can be fitted to the furnaces for external programming of, or data logging from the temperature controller/programmer(s).

Connections provided for single instrument RS232 or RS485 standards.
Multi instrument RS485 or RS422 standards
Software programmes can be supplied ranging from simple but sophisticated programming stations with data logging facilities to full SCADA packages.
Custom designed systems can be provided to suit your specific requirements.

Various Temperature/Process recorders can be supplied ranging from simple paper chart instruments to multi-channel graphics display units:-

Single, 2 pen or 3 pen 100mm. Chart width continuous writing recorders.
6 point 100mm. chart width dotting recorders.
180mm. and 250mm. chart width multipoint recorders.
Small and large scale data acquisition instruments with front graphic displays.